Eryx Echo Flashlight body parts
IF you want to build your own discontinued Eryx Echo here are the parts that you need.
Because of the way I had to set this up on my website software it's not tracking stock properly. We'll try to keep up with current levels and will contact you if there's any issues with your order.
Bead blasted and anodized finish
18350 lithium ion battery
Dimensions: 4"(100mm) long, 1.1"(28mm)head diameter, 1"(25mm) battery barrel.
Weight with battery installed: 108 grams
The Echo is meant to use a 17mm driver and run a 16mm led board from Mountain electronics. It's designed to use a LEDil Boom Reflector. The tail is threaded for a Mccklicky switch. Make a note if you'd like me to include a switch boot and which color. Black, orange or glow in the dark green. The clip mounting holes are setup to accept any of the standard aftermarket clips. It uses #4-40 screws (not included with a clip).
I'm also offering a dragon upgrade which comes with a copper pill and optics. If you buy the upgrade you don't need an aluminum pill!!
You will need to source a 22mm(or .875")x2mm lens.
The orings used are -018 and -019 size.
ABSOLUTELY 100% FINAL SALE!!!